Boxym Digital Thermometer Non-Contact Infrared Forehead Digital Lcd Body For Adults And Children Heat Heat Thermometer Heat Measurement


This product is currently out of stock and unavailable.

Categories: , , , Brand:

Easy and fast – one button operation, C can be replaced easily and instantly. Automatic shutdown operation of the 60s.

Safe and reliable – Use the latest, accurate and reliable infrared detection technology, compared to the traditional mercury thermometer, to prevent the damage of mercury vapors absorbed by the body

– 1 x infrared thermometer
– 1 x retail box
1 x User Guide

Q: Does it turn on when you turn it on? We have one now and use it a lot during the night but do not know if it works or not to start reading
A: The green backlight will turn on when the thermometer reads. However, note that the red backlight will turn on when the thermometer detects low or high readings.

Q: My will continue to show l (deg) f … or h (deg) f ?? How do I fix this
A: You can try to recalibrate – just press the F2 button until you see 888.8 on the screen.

Q: How to keep a clean inspection test if there are no test covers?
A: The thermometer does not come with test covers. In fact, the existence of the cover will affect the accuracy of its readings. To clean, simply dip a cotton ball in the alcohol and soak the sensor. Please make sure the sensor surface reflects light and glare after cleaning it. This is important because any dirt and / or oil on the sensor will prevent accurate reading. Be sure to wait 5-10 minutes for the alcohol to completely evaporate before using the thermometer again.

Q: Is it also measured in Celsius?
A: A dual mode thermometer can measure temperatures in both Fahrenheit and Celsius. Here are the steps to help you change the unit of measure:
1. When the thermometer is off, press and hold the F2 button for about 6-9 seconds. The screen will display — “with” M “in the lower left corner.
2. Continue to hold the button until you see the “— C or F” temperature unit on the screen.
3. Release the F2 button. The temperature unit “— C or F” will start flashing.
4. Press the F2 button again within 5 seconds to change the temperature to the unit you select.

Q: Does this thermometer maintain previous temperatures?
A: The thermometer can store up to 20 temperature readings. To access the caches stored in memory, just follow these steps:
– Press and hold the F2 button for about 3-6 seconds until you see “—” M on the LCD display screen
– Press the F2 button again and the screen will display the number “1” with the letter M to indicate the first recorded reading. The recorded temperature will be displayed.
– To recover the next recorded reading, press the F2 button again and the number “2” will display the letter M, indicating the second recorded reading.
– Repeat to remember previous recordings.

Q: How do you calibrate it?
A: Clinically calibrated for medical use.
Clinically tested and proven to be reliable and accurate in use according to instructions.
To correct a temperature that reads incorrectly in a digital thermometer, all you have to do is press the reset button.
With many thermometers, it’s just a matter of long pressing the power button for a few seconds, but you may need to check with your manual to make sure.
Once you have done that, you will be able to perform the test again and all readings should be correct.

Q: What is the temperature range for this?
A: The forehead temperature condition has a range of between 89.6F – 107.9 F while the ear temperature condition has a range of between 32F – 212F.

Q: Does this thermometer warn of low body temperature, i.e. hypothermia?
A: The thermometer will release 3 short beeps with red backlight for 3 seconds if the temperature drops below 89.6 F.

Q: I get very different readings when I measure my son’s heat through the forehead. What am I doing wrong?
A: Before taking forehead temperature, please make sure you remove dirt or hair from the forehead area. With the sensor cover / test attached, place the thermometer in the center of the forehead, just above the eyebrow. Make sure the thermometer is in contact with the forehead. Press and release the F1 button. You will hear a beep and the reading will be displayed on the LCD screen. Please also remember that when you are placed at different points on the forehead, the temperature readings at different points on the forehead will change. Furthermore, during multiple readings, you must make sure that you wait at least 10 seconds between each reading. The thermometer is really sensitive to small changes in temperature and often non-stop reuse between readings will result in inaccurate readings due to heat caused by friction.

Q: Should the forehead and ear reading be different? The ear reading shows at least a step if not higher than the forehead
A: If you have a base temperature for someone when he is not running a temperature taken in your preferred method, any method can be considered accurate.
The correlation between temperature results is as follows:
The average normal mouth temperature is 98.6 F (37 C).
Anus temperature is 0.3 degrees Celsius to 0.6 degrees Celsius (0.6 degrees Celsius) higher than mouth temperature.
Ear (drum) temperature is 0.5 F (0.3 C) to 1 F (0.6 C) above mouth temperature.
Armpit (armpit) temperature is usually 0.5 F (0.3 C) to 1 F (0.6 C) below mouth temperature.
A (temporary) forehead scanner is usually 0.5 F (0.3 C) to 1 F (0.6 C) below mouth temperature.

Estimated business days: 14